Honeywell CT60 Device Provisioning

Please follow the steps provided below, using the provided barcode where necessary:

1. When the device starts up, follow the steps until it asks for a provisioning barcode to be scanned
2. Scan the barcode at the link provided (scanning it from your computer screen will work, no need to print it off)
3. If your device has mobile network enabled and is connected to the internet, skip to step 7
4. Hit the option to Configure Device Manually
5. You will then need to setup your network settings for your local wifi (swipe up from the home screen, navigate to Settings > Wi-Fi and then hit + Add network) 
6. The install script will run once you’re connected to the Internet
7. Device will reboot once the script has completed - you will know it’s complete if it loads the Vapour wallpaper (you can change your wallpaper to your preference once it’s up and running)
8. Go to your Vapour instance on the Google Chrome app
9. Click the 3 dots next to the address bar and click “Add to Homescreen” - this will then add a homescreen link on your device for easy access (steps are shown here)

While using a hardware scanning device (as opposed to a generic smartphone), please ensure the Hardware Scanner Enabled option is enabled within your user profile: